NOTE- Please do NOT use a tape measure, we need ACCURATE measurements and in DECIMAL form not fractions.
Your drawing should be like our sample picture below and the numbers should start at zero on the left and increase as you go to the right, ending with the total rail length.
EXAMPLE- 0"-1.437"-3.150"-8.240"-10.110"-13.425"
We build custom fuel rails to order. These feature large heavy duty -10 aluminum extrusions, a properly formed radius, diameter and depth for standard 14mm injectors. ORB ported -10 ends accept any -10 ORB fitting. Standard lengths up 18" each side. NOTE: We only offer rails with the injector body 90 degrees to the rail, no angled injectors such as on some LS manifolds.
As this is a custom made to order item you must either send us a drawing of your desired port spacing or your manifold, or your old rails to copy spacing.
If you want the mounting holes pre-drilled you must provide a detailed drawing showing their EXACT locations on the rails relative to the injector holes or send in the manifold with injectors for fitting. This is far too easy to get wrong from a tape-measured “guess”.
We run these on our 3000+hp methanol combos with zero cylinder to cylinder balance issues.
Price is for pair of rails suitable for a typical V8 engine.
Call for additional details. 540-905-3577