CYLINDER HEAD TEMPERATURE SENSOR M10 X 1.5 THREAD

Part #: MADHeadTemp-M10

Brand: MAD Racing Parts

$39.00

Shipping calculated at checkout.

Finally there is a good solution for measuring cylinder head temperature on dry or solid heads. We couldn't get anyone to make these for us so we made our own! Right here in house. Screw this brass sensor into an unused accessory hole on the end of head.

!!!Caution!!! The sensor should be finger tightened only, stem is hollow 5 INCH pounds torque MAX. Apply a small dab of RTV near hex base if you want to provide additional security. DO NOT OVER TIGHTEN.

Standard GM coolant scaling means an easy dropdown setup for most ECUs on the market however we do provide a scaling chart if needed.

It also features the standard 2-wire GM Packard connector. The mating connector is available as an add on when you order.

Fahrenheit Ohms
0 25,580
14 16,321
23 12,413
32 9,516
41 7,354
50 5,728
59 4,496
68 3,555
77 2,830
86 2,268
95 1,828
104 1,483
113 1,120
122 992
131 819
140 679
149 566
158 475
167 400
176 338
185 287
194 249
203 210
212 180
221 156
230 135
239 117
248 102
257 89
266 78
275 69
280 61
293 54
302 48
Part #: MADHeadTemp-M10